Walls with depth, finished in calm, even colour.
Panelled walls, dado rails and wainscoting, slatted feature walls and full interior decorating. The finish depends on the preparation, so that's where we spend our time.
- Filled, sanded and primed first
- Panels set out to the room
- Breathable finishes for old walls
What we take on.
Panelling, wainscoting and slatted walls, and interior painting on surfaces prepared properly first.
Wall panelling
Box moulding, shaker panels and full-height panelling, set out so panels are balanced on every wall.
Dado rails and wainscoting
Classic lower-wall panelling for halls, stairs and dining rooms.
Slatted feature walls
Timber slats that add warmth and soften echo in open rooms with hard surfaces.
Interior painting
Walls, ceilings, woodwork and radiators, prepared properly and finished evenly.
Mouldings and trims
Skirting, architraves, coving and picture rails, matched or replaced.
Colour and finish
Colours and sheens chosen for the light in your room, and sampled on the wall before we commit.
Good paint can't hide bad preparation.
Two coats of the best paint will still show every crack, dent and gap underneath. So most of the work happens before the colour goes on.
Protect
Floors, furniture and fittings are covered and masked before we start.
Repair and fill
Cracks, holes and dents are filled and sanded flat, and gaps along trims are sealed.
Prime
New plaster gets a mist coat, and bare wood and repairs are primed, so the finish coats look even.
Set out the panels
We plan panel widths around doors, windows, sockets and the stairs, so every wall looks balanced, not just the first one.
Apply the finish
Usually two finish coats, cut in by hand, with clean lines at ceilings and trims.
Check in daylight
We check every wall in natural light before we call it finished.
Choosing a finish.
The decisions that shape how the finished room looks, lasts and costs. We'll talk them through with you on site.
Matt, eggshell or satin
Matt hides small imperfections on walls. Eggshell and satin wipe clean more easily on woodwork and busy walls.
MDF or timber panelling
MDF gives crisp, stable panels for painting. Timber suits stained or oiled finishes.
Breathable finishes
Older solid walls need to let moisture out. Breathable paints and lime-based finishes help stop damp being trapped in the wall.
One colour or two
Painting walls, panels and trims in one colour makes a room feel calm and larger. Contrasting trims make a room feel more traditional.
The facts behind the finish.
Rules, standards and science worth knowing before you start, with our sources.
Echo is not the same as noise
Slatted panels and soft furnishings reduce echo inside a room. They do little to stop sound passing through walls: that needs mass, insulation and sealed gaps.
Older walls
Many older Irish homes have solid walls. Sealing them with non-breathable finishes can trap moisture and lead to damp patches and flaking paint.
Fresh paint and fresh air
Choose low-odour, low-VOC paints where you can, and keep rooms ventilated while paint dries.
Your questions, answered.
Anything else, just ask. Call +353 89 457 8129 or email [email protected].
- Can you panel a wall with sockets and switches on it?
- Yes. We set the panels out around them, and a registered electrician can extend the boxes so faceplates sit flush.
- Do you paint ceilings and woodwork too?
- Yes: walls, ceilings, doors, frames, skirting and radiators.
- Can panelling hide an uneven wall?
- Panelling can disguise some unevenness, but the wall still needs to be sound. We check and repair it first.
- When can furniture go back?
- Most paints are dry to the touch within hours but take longer to harden fully. We'll tell you the times for the paint we use.
Planning panelling or painting? Let's talk.
Book a home visit. We'll look at the space, listen to what you want, and follow up with an itemised quote in writing.