Floor sanding · Dublin

Old wood floors, brought back to life.

Original floorboards, parquet and worn engineered floors, repaired, sanded and refinished. We fix what's loose or damaged first, then sand, add colour if you'd like it, and seal with the finish that suits the room.

  • Repairs made before sanding
  • Colour sampled on your own floor
  • Finish chosen for how you live
What we do

What we take on.

Floorboards, parquet and engineered floors repaired, sanded and refinished, with the colour sampled on your floor first.

  • Floorboard restoration

    Original pine and oak boards sanded back, with loose boards refixed and damaged ones replaced.

  • Parquet restoration

    Loose blocks re-laid, missing ones matched, and the pattern sanded flat without losing its edges.

  • Engineered floors

    Engineered boards can be sanded too, if the real-wood top layer is thick enough. We check before we start.

  • Gap filling

    Gaps between old boards filled with slivers of timber or a filler, depending on the floor and how much it moves.

  • Staining and colour

    Natural, lighter, darker or grey tones, sampled on your own floor before we commit.

  • Oil and lacquer finishes

    Hardwax oil, lacquer or traditional oil, chosen for how busy the room is.

The work underneath

Sanding is the easy part. Preparation is the job.

A good restoration depends on what happens before and after the sander: the repairs, the sequence of abrasives, and a finish matched to the room.

  1. Inspect and test

    We check for loose boards, nails, old repairs and the thickness of the wear layer, so we know how much the floor can take.

  2. Repair first

    Loose boards are refixed, nails set below the surface, and damaged boards or blocks replaced with matching timber.

  3. Sand in stages

    We work from coarse to fine abrasives, and finish the edges and corners so they match the middle of the room.

  4. Fill and smooth

    Gaps and small defects are filled, then the floor is sanded smooth again for an even surface.

  5. Sample the colour

    Stain and finish samples go on your own floor, because timber changes colour once it's sealed.

  6. Seal and cure

    Several thin coats of finish, lightly abraded between coats. We'll tell you when you can walk on it and when furniture can go back.

Choices

Choosing a finish.

The decisions that shape how the finished room looks, lasts and costs. We'll talk them through with you on site.

  • Hardwax oil

    A natural, matt look that's easy to repair in patches. It needs occasional maintenance.

  • Lacquer

    A tough film that resists wear and spills, good for busy halls and kitchens.

  • Natural or stained

    Natural keeps the timber's own colour. Stains go lighter, darker or grey, and should always be sampled first.

  • How to fill gaps

    Timber slivers suit wide gaps in old pine boards. Filler suits small gaps, but can crack if the floor moves a lot.

Good to know

The facts behind the finish.

Rules, standards and science worth knowing before you start, with our sources.

  • Not every floor can be sanded

    Engineered floors can only be sanded if the real-wood wear layer is thick enough, and some thin ones only once. A quick check at a threshold or vent tells us.

  • Gaps come and go

    Wood floors are happiest at about 45 to 65% relative humidity. Gaps that open in dry winter weather often close again as humidity returns.

    Source: Wood Flooring Association: general installation guidelines

  • Dust and the rest of the house

    Sanding machines collect most of the dust, but fine dust still travels. We seal off doorways and protect the rest of the house while we work.

Questions

Your questions, answered.

Anything else, just ask. Call +353 89 457 8129 or email [email protected].

How long does floor sanding take?
It depends on the size of the floor, the repairs and the finish. Much of the time is drying between coats. Your quote includes a timeline.
Can engineered wood be sanded?
Often, yes, if the wear layer is thick enough. We check it before we start, usually at a threshold or a floor vent.
Will it be dusty?
Sanding machines collect most of the dust. We seal doorways, protect the rest of the house, and clean up before we leave.
Can you make my floor lighter or darker?
Yes. We sample stains and finishes on your floor first, so you see the real colour before we commit.
Next step

Planning a floor restoration? Let's talk.

Book a home visit. We'll look at the space, listen to what you want, and follow up with an itemised quote in writing.

Call us Book a visit